Besides the Lee Short Powder Charge Die, what else do I need to adapt the Uniflow to the top of the press? /Chris
Besides the Lee Short Powder Charge Die, what else do I need to adapt the Uniflow to the top of the press? /Chris
This may be what you are looking for...
https://www.amazon.com/Pistol-Adapte.../dp/B0041OJAJS
G'Luck!
2nd Amend./U.S. Const. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."
~~ WWG1WGA ~~
Restore the Republic!!!
For the Fudds > "Those who appease a tiger, do so in the hope that the tiger will eat them last." -Winston Churchill.
President Reagan tells it like it is: https://www.youtube.com/watch?v=c6MwPgPK7WQ
Phil Robertson explains the Wall: https://youtu.be/f9d1Wof7S4o
Yes.....thanks!
The adapter that JB showed you will work. I used one on my Lee Classic cast turret for a few months until I got my Pro Auto Disk and it worked fine.
A direct link to the manufacturer, https://gun-guides.com/Perfect-Reloa...482;-c23094183
If you have any questions call, he’s a super nice guy and knows his stuff, really left me with a good impression.
The only reason I am thinking of switching to the Uniflow is the Uniflow throws consistant charges 100% of the time, right on the money. The Lee pro set up on my Lyman Tmag drops charges really bad with both the fixed disc and the adjustable disc. I was also thinking of switching to a auto index Lee classic turret. It would be sweet if I could make the auto disc throw decent charges. The Lee pro discs work great with smaller charges of Bullseye on my two 1000 presses. I am trying to drop 19.5gr of IMR 4227. Wish I could figure it out. /Chris
I simply threaded a new model Uniflow measure right into my 2nd Lyman T-mag Turret, rather than using a powder measure stand, or the stand off bracket.
Like this.
I don't use case activated linkage or anything with my T-mag II, and when I turn the turret head to the Uniflow powder charge station, I just (lightly) raise the case up to the mouth of the Uniflow's green plastic powder drop tube, and then charge the case.
Probably using the wrong terminology calling the green plastic funnel piece a drop tube, but it's this part.
I use the Uniflow like this:
Guess I don't really understand what the riser is used for.
- Bullwolf
2nd Amend./U.S. Const. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."
~~ WWG1WGA ~~
Restore the Republic!!!
For the Fudds > "Those who appease a tiger, do so in the hope that the tiger will eat them last." -Winston Churchill.
President Reagan tells it like it is: https://www.youtube.com/watch?v=c6MwPgPK7WQ
Phil Robertson explains the Wall: https://youtu.be/f9d1Wof7S4o
The perfect adapter works great. I have one for both my Lyman 55 and my Lee PPM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |