MiHec MP 452-200 HP 4 cav.
They just came back in stock and they are running a fantastic sale on all their molds.
https://www.mp-molds.com/e-shop/mold...2-200-hp-4-cav
MiHec MP 452-200 HP 4 cav.
They just came back in stock and they are running a fantastic sale on all their molds.
https://www.mp-molds.com/e-shop/mold...2-200-hp-4-cav
Nothing yet today. I say yet because I cant seem to make up my mind on ordering one of the Marty's Arms buckshot molds. Or waiting for sharpshooter molds to possibly come back in the future.
Ideal 311466 152 gr. Loverin bullet. I know what I will be doing tomorrow.
USMC 6638
I got the Lee 514-450 mold for my 50-70, I have always used a my dads 50-100-450 RCBS mold for the 50-70 along with .348 brass. After 30 years I finally ordered some 50-70 Starline brass and a proper mold.
Last week I got a NOE312299 to go along with my 314299. I have only made one trip to the range but so far 30-40 and 7.5X55 Swiss seem to really like it.
Just ordered this week -
MP 356-125 2R 6 cav Flat base
MP 452-200 SWC PB (HG#68) 4 cav.
MP 356-130 2R 6 cav Bevel base NO LUBE groove
Looking for a 308, 223 and 44 Cal to be in stock.
I'm calling it an "investment" in precious metals.
I got a Lyman 356402 NIB at the local gun shop last week at too good a price to pass up. I needed another 9mm mold like a hole in my head but what can I say.
Just bought 2 H&G molds from a member here. A 68 flat base and a 43, both 4 cavity. And a Lyman 356402 for a buddy, also a 4 cavity. Also a very nice Star sizer! Thanks Nick!
I picked up a 452460 A nice 200 grain bullet for the ( I meant to say 45), 4 banger.. It does have Nutcracker handles but who cares for $10
Last edited by randyrat; 08-14-2017 at 07:38 AM.
Accurate 43-250G. Nose length of .315" to keep the OAL of the loaded round at or below 1.610" so it feeds in my Browning B92 .44 Magnum.
I got the Lee 312-185R this week. Might be a little small,but going to try using it for the Mosin.
Ordered an NOE copy of the Saeco 315
The fear of the Lord is the beginning of knowledge: but fools despise wisdom and instruction.
Proverbs 1:7
I did not buy a new mold but I did get out my Hensley and Gibbs #130 to be sure I would still be able to use it this winter. I found this mold at an estate sale years ago. I thought I would not be able to get any molds since there were folks in front grabbing anything they could get. They passed up this old heavy H&G #130 for the shinny new Lees and Lyman molds. I managed to get the H&G #130 and a Saeco 294441 4 cavity .44. I really felt cheated, (HA)! I am 81 so the molds are getting a little heavy for me so I will build a rest for them. With proper heated molds and melt temp they both cast fantastic boolits.
Last edited by tew45; 11-06-2017 at 12:23 AM. Reason: number wrong
I ordered accurate 35-147bg with some small modifications. A single cavity hope it gets here soon. It was ordered om oct. 27th.
A man who is good enough to shed his blood for his country is good enough to be given a square deal afterwards.
-Theodore Roosevelt
http://castboolits.gunloads.com/show...2441-Ron-in-PA
Accurate 36-180F. Ordered on 10/30 and the wait is agonizing.
Still waiting on my mold from Tom at Accurate. Tom designed the 35-180CG for me. Its a tumble lube, .352" 180gr gas check design for my 1951 model 07 SL Win rifle. .351cal. My order is for the 3-cavity aluminum and takes the 35cal gas check.
Yesterday, I did receive my Win .351 brass that Safeshot sent to me for free!
Chris
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |