I have a #3 MR die.
Muzzle resizer for 22 WCF.
22 WCF is not 22 Hornet or 225 Win. It is 22 WCF.
See this thread:
http://www.assra.com/cgi-bin/yabb/Ya...num=1221705914
I have a #3 MR die.
Muzzle resizer for 22 WCF.
22 WCF is not 22 Hornet or 225 Win. It is 22 WCF.
See this thread:
http://www.assra.com/cgi-bin/yabb/Ya...num=1221705914
Last edited by BrassMagnet; 01-14-2017 at 09:04 PM.
I have PC#17
Priming Chamber #17 for 33 Winchester.
I have Priming Chambers #21, #25, & #27
#25 is 41 Long
What is #21 for?
What is #27 for?
Last edited by BrassMagnet; 01-16-2017 at 08:26 PM.
I inventoried a box of items I had and put the best description from the markings. Be glad to provide pictures or further description if you have any questions. I’m looking for dies for 40-63 (405 doner cases. I already have the priming die); 40-65; 38-50 (30-40 Kraig and RMC cases); 35-40 (38-55 Cases); or 38-55. Also interested in tong tools or case inserts for 45-70 or 38-55.
310 243 4 dies
*243-2440Da
*Deprime #2
*Expander
*Sizer 243 WIN-MR
310 (Box Marked 222)
*Seater (222) stem marked 45C
*Decapper (no marking)
310 (sacked marked 30-06 Short
*Sizer (marked 123)
*Priming die bullet seater stem?
*Looks like Expander plug
310 Two Dies
*Stem (marked 329)
*Sizer
*Decapping die
310 Two dies and Seating stem
*expander (marked 311)
*Expander (Marked 224)
*Seater (marked 277)
310 Expander Plugs
*marked 285
*marked 280
310 Shell Inserts
*marked #1
*marked #2 (2)
310 Sizer Dies
*Marked 222
*Marked 116
310 Priming stems
*Spring return (2)
Two dies
*One looks to be a sizer (marked 121)
*Priming die (marked #6)
Best Regards,
John
I just picked up 2 Tru Line JR turret presses cheap and found the 310 dies to be a bit pricey. There is a fellow on evil bay tha makes a new turret for the JR that uses normal loading dies. I just bought one for $40. It fit well and works well and now I can use my existing dies and I have the adapter to use std shell holders as well. The press doesn't have a lot of leverage so I'll probably set it up for 32 S&W long and a couple of other easy to size cases.
One of my TL Jr presses stays set up more-or-less permanently for the 32 S&W Long. It seems to be the perfect size for that cartridge. I have to admit though that I often batch process the brass by doing decap and full length sizing with a TC die in a big single stage press.
Froggie
"It aint easy being green!"
Posted comments in the quote above with arrows <--- Info is from my copy of the Lyman Ideal Handbook No 39, copyright 1953
I would be interested in a set for 25-06 (257 would probably work also), even if pieced together. I have spare priming chambers and expander chambers that I can complete it with, the other parts are what I need. Could make do with just the expander stem also along with the muzzle resizer and DA(seater/crimp die).
I have a 30 cal magnum (probably 300 H&H, but may work with Win Mag) muzzle rezizer and DA die Id trade.
Have two pieces of 303 Brit dies. Will check further to ID which parts.
Need a handle for 348.
Interested in 44-40 set
Have a complete steel handle set for 375 H&H Id trade for anything useful to me.
Last edited by Malamute; 08-29-2017 at 11:16 AM.
"Far better it is to dare mighty things, to win glorious triumphs even though checkered by failure, than to rank with those poor spirits who neither enjoy nor suffer much because they live in the gray twilight that knows neither victory nor defeat." -Theodore Roosevelt-
The best way to predict the future is to create it.
Well, since I now have the shell holder, I guess I'm on the lookout for a set of 38S&W dies! What a way to begin - start with a shell holder purchased by accident because of my dyslexia! I'll have to find a gun, too.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
Cute, yes. However, LOML convinced me I can only spend money once - and I still have to pay for the flintlock. Expecting an e-mail any day.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
I have a complete .45 ACP Lyman 310 tool new. I would like to trade it for .22 Hornet 310 dies... I have an extra small handle.
Please let me know... Thanks... Bobby...
Anybody have 303 savage dies or .44spl/mag dies collecting dust?
My firearms project blog
Deal made... Thanks.... Bobby
I have a set of 44-40 (complete) will trade for a good set of 223 Remington regular press dies. The 44-40 dies are in excellent shape and are in the original orange plastic box.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |