I bought this Leader years ago in non functioning condition.
Got it working by making some new Springs.
I bought a box of Navy Arms .32 RF but have never fired it.
I decided to make some chamber Adapters out of some .22 barrel Liner material.
I also turned down a section of the barrel liner to slip into the barrel without reaming out what rifling was left.
The liners and chamber Adapters are being Epoxies in place.
So far the pistol does fire off primed cases.
Once the epoxy has fully cured I will test fire it off a test stand I am making.
I did a .32 S&W Top Break the same way before and redid the firing pin for the .22 RF
Now my phone won't allow me to download the pictures.
But I will try again later