My Lee Classic Cast broke, (See other post), so I needed to replace it.
I have a RCBS RC a few Herters "C" type, A few Pacific "C" type, and a CH "H" type.
Never used a tilt back press, so i went with the CH.
Opening is not a tall as the Lee.
The front post has more offset, for more clearance, than the RCBS.
The compound is way more than the Lee, and a little more than the RCBS.
Feels like it will do well forming brass.
The tilt back is not a problem for me. I load on another press.
So far I like it.
Attachment 199530