I find my patches between 15 and 20 yards from the muzzle. I also pre-saturate my patches.
I find my patches between 15 and 20 yards from the muzzle. I also pre-saturate my patches.
that wouldnt last me a week of heavy shooting pilgrim!
LOL this is good stuff!
I am having the same kind of trouble with PRB in the Lyman GPH. I thought I had it 'fixed', but, not yet. I also like the lack of recoil using the PRB vs 450 PP bullets.
Instead of PRB have you tried shorter bullets?
The GPH has a 1:32 twist. A bit fast for a Patched ball unless you cut the powder back around 60gr 2fg.
Try some .535 balls. Might just be surprised.
I have tried some paper patched Lyman Plains bullets, they are fairly short at .85, this rifle didn't shoot them any good either (my other 54s love them!!) The one thing i have not tried is a Greased Maxi ball WITHOUT an over powder wad. My dad told me he shot this rifle with Maxi balls and it shot good for him, Dad definitely knows what he is doing and his iron sight shooting has always been TOP SHELF. Back when he shot this gun it was before i had learned about over powder wads, so he would have been shooting the Lubed Maxi balls WITHOUT an over powder wad (bubba.50 swears by this method as well) I might get bored enough one day to try it? But regardless if it shoots good without an overpowder wad or not i stil have ZERO faith in this QLA muzzle, its gonna go away no matter what. I might as well wait til i get rid of the QLA, just a waste of powder, and lead. I'm not hurting for rifles, got all bases very well covered without this New Englander, so it's definitely at the bottom of my priority list
I been known to swear at a few things but, I don't "swear to" anything. just said I've never used wads in my guns or seen the need to. if my guns would shoot any better WITH a wad I'd be scared to shoot'em.
lewis - stick with yer ppb's, you got that game wired and no need for patched balls.
rfd, I am sure i will shoot some Round ball thru my pistols, my expectations will be much lower, 25 yards will likely be my zone. After shooting ppb's as accurately as i have from 50 yards, all the way out to 500 yards, i am probably expecting WAY to much from a Stock 48 twist gun with Roundball.
with a 1:48 twist, that rifle should do a whole lot better than 4" at 50 yards. Its a myth that the 1:48 twist is better for conicals than it is for round balls.
every rifle is unique unto itself and will always take load testing to bring out its inherent best.
I know roundballs have, can, and will take anything on the planet that can be taken with a muzzleloader and I have nothin' against them. that bein' said, I just don't like the fuss & bother of havin' to fumble with a greasy patch, center the ball over it & the muzzle, smack it with a short starter, ram it down on the powder and to hafta do this every single shot. I can stand up ever how many Maxi-balls or Lee R.E.A.L.s I figger to need in a flat pan, melt some lube, pour to top groove, punch'em out after the lube sets and then I'm good to go in the field or at the range. get one out, push it into the muzzle with my thumb, ram it home & shoot.
and same thing if I was into this paper-patchin'. prepare yer bullets before ya leave the house & be ready to go.
Not shoot round ball? Got the .515 ball mold for the .52 bore paper patch guns.
What I don't have is time to dial in the .52 flinter Renegade with Lyman #512138.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |