Does anybody make a tool to check to see if primer pockets are crimped or not in 5.56/223 cases? Sometimes they look like they are crimped but are in fact not and other times they look like they aren't but are.
Does anybody make a tool to check to see if primer pockets are crimped or not in 5.56/223 cases? Sometimes they look like they are crimped but are in fact not and other times they look like they aren't but are.
Would be a handy tool. Primer pocket gauge.
We treat them all the same, do a swage on all, takes the guess work out.
There is the primer pocket swage gage at Brownell's.
http://www.brownells.com/reloading/m...prod71030.aspx
I have one. It works well.
If you swage a primer pocket that does not need to be swaged, then you run the risk of opening that primer pocket too much, then the primer won't stay in. Been there, done that.
I'm not aware of a commercial available gauge, there are pin gauges that can be purchased in sets that can measure what you actually have.
My 1050's run the swage arbor into the pocket of every case, crimped or not, never has hurt anything.
This is what I use, works well for my applications.
http://rcbs.com/Products/Case-Prepar...r-Combo-2.aspx
Slim
JUST GOTTA LOVE THIS JOINT.
https://ballistictools.com/store/rel...-pocket-gauges
Sent from my SM-N920V using Tapatalk
My pleasure.
Sent from my SM-N920V using Tapatalk
Its not as if the swager will suddenly grow in size when it comes across a case that doesn't need swaging.
Sent from my Galaxy Tab 2 using Tapatalk
Have a whole bunch of 9mm cases that now have too large primer pockets. Went from have some crimped pockets mixed in to having the ones that were crimped being just fine to the ones that were not crimped being too large. Don't know what went wrong. Hasn't happened since as I don't swage uncrimped primer pockets any more.
I use the Lyman primer pocket cleaner tool. It has a cutting edge that will take out the crimp, but does not enlarge the pocket. Every "new" piece of 5.56 or 223 rem brass I pick up at the range I drop nose first into my hand drill then stick the primer pocket cleaner in the primer pocket and give the drill a few turns. After that I never have to do it again and I've never had a problem with it making the primer pockets too large
Hick: Iron sights!
Lyman has two primer tools, a primer pocket cleaner and a primer pocket uniformer. The latter actually cuts the crimp off.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
I just use the Dillon Super Swager. Does a good job, never messed one up yet, and I've run literally thousands of Mil crimped brass through it. I don't even check if it's Mil or not anymore, just run them through. Most of even the commercial brass I get has primers crimped in, guess it takes too much time for the manufacturers to change dies, so they crimp them all (from my experience). Dillon Super Swager doesn't enlarge the primer pockets either, nice snug fits
Gun Control means hitting what you aim at!
Certified NRA Pistol Instructor
Life Member of the NRA
Life Member of the Disabled American Veterans Association
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |