RotoMetals2Inline FabricationSnyders JerkyMidSouth Shooters Supply
Load DataReloading EverythingRepackboxTitan Reloading
Wideners Lee Precision
Results 1 to 8 of 8

Thread: Buckshot's Machine Shop Inventory

  1. #1
    Moderator Emeritus / Trusted loob groove dealer

    waksupi's Avatar
    Join Date
    Mar 2005
    Location
    Somers, Montana, a quaint little drinking village,with a severe hunting and fishing problem.
    Posts
    19,403

    Buckshot's Machine Shop Inventory

    1. DRILL PRESS: A tall upright machine useful for suddenly snatching flat
    metal bar stock out of your hands so that it smacks you in the chest and
    flings your beer across the room, splattering it against that freshly
    painted part you were drying.

    2. WIRE WHEEL: Cleans paint off bolts and then throws them somewhere under
    the workbench with the speed of light. Also removes fingerprint whorls and
    hard-earned guitar calluses in about the time it takes you to say, "SH**!!!"

    3. ELECTRIC HAND DRILL: Normally used for spinning pop rivets in their holes
    until you die of old age

    4. PLIERS: Used to round off hexagonal bolt heads.

    5. HACKSAW: One of a family of cutting tools built on the Ouija board
    principle: It transforms human energy into a crooked, unpredictable motion,
    and the more you attempt to influence its course, the more dismal your
    future becomes.

    6. VISE GRIP PLIERS: Used to round off bolt heads. If nothing else is
    available, they can also be used to transfer intense welding heat to the
    palm of your hand.

    7. OXYACETYLENE TORCH: Used almost entirely for setting various flammable
    objects in your shop on fire. Also handy for igniting the grease inside a
    wheel hub you're trying to get the bearing race out of.

    8. WHITWORTH SOCKETS: Once used for working on older British cars and
    motorcycles, they are now used mainly for impersonating that 9/16 or 1/2
    socket you've been searching for the last 15 minutes.

    9. HYDRAULIC FLOOR JACK: Used for lowering an automobile to the ground after
    you have installed your new disk brake pads, trapping the jack handle firmly
    under the bumper.

    10. EIGHT-FOOT LONG DOUGLAS FIR 4X4: Used to attempt to lever an automobile
    upward off a hydraulic jack handle.

    11. TWEEZERS: A tool for removing splinters of wood, especially Douglas fir.

    12. TELEPHONE: Tool for calling your neighbor to see if he has another
    hydraulic floor jack.

    13. SNAP-ON GASKET SCRAPER: Theoretically useful as a sandwich tool for
    spreading mayonnaise; used mainly for removing dog feces from your boots.

    14. E-Z OUT BOLT AND STUD EXTRACTOR: A tool that snaps off in bolt holes and
    is ten times harder than any known drill bit.

    15. TWO-TON HYDRAULIC ENGINE HOIST: A handy tool for testing the tensile
    strength of bolts and fuel lines you forgot to disconnect.

    16. CRAFTSMAN 1/2 x 16-INCH SCREWDRIVER: A large motor mount prying tool
    that inexplicably has an accurately machined screwdriver tip on the end
    without the handle.

    17 AVIATION METAL SNIPS: See hacksaw.

    18. TROUBLE LIGHT: The home builder's own tanning booth. Sometimes called
    drop light, it is a good source of vitamin D, "the sunshine vitamin," which
    is not otherwise found under cars at night. Health benefits aside, its main
    purpose is to consume 40-watt light bulbs at about the same rate that 105-mm
    howitzer shells might be used during, say, the first few hours of the Battle
    of the Bulge. More often dark than light, its name is somewhat misleading.

    19. PHILLIPS SCREWDRIVER: Normally used to stab the lids of old-style
    paper-and-tin oil cans and squirt oil on your shirt; can also be used, as
    the name implies, to round off the interiors of Phillips screw heads.

    20. AIR COMPRESSOR: A machine that takes energy produced in a coal-burning
    power plant 200 miles away and transforms it into compressed air that
    travels by hose to an Pneumatic impact wrench that grips rusty bolts last
    tightened 70 years ago by someone at Ford, and rounds them off or twists them off.

    21. PRY BAR: A tool used to crumple the metal surrounding that clip or
    bracket you needed to remove in order to replace a 50 cent part.

    22. HOSE CUTTER: A tool used to cut hoses 1/2 inch too short.

    23. HAMMER: Originally employed as a weapon of war, the hammer now-a-days is
    used as a kind of divining rod to locate expensive parts not far from the
    object we are trying to hit.

    24. MECHANIC'S KNIFE: Used to open and slice through the contents of
    cardboard cartons delivered to your front door; works particularly well on
    boxes containing upholstered items, chrome-plated metal, plastic parts and
    the other hand not holding the knife.

  2. #2
    Boolit Master

    SharpsShooter's Avatar
    Join Date
    Aug 2005
    Location
    Rainelle, West Virginia
    Posts
    1,913

    Post

    I gotta clean my monitor again!
    NRA Life Member Since 1981



    "The very atmosphere of firearms anywhere and everywhere restrains evil interference - they deserve a place of honor with all that's good"-- George Washington

    II Corinthians 4:8-9. We are hard-pressed on every side, yet not crushed; we are perplexed, but not in despair; persecuted but not forsaken, struck down, but not destroyed."

    Psalms 25:2 O my God, I trust in thee: let me not be ashamed, let not mine enemies triumph over me.

    [SIGPIC][/SIGPIC]

  3. #3
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099
    Ric, you forgot the wire, duct tape and hose clamps.

  4. #4
    Boolit Buddy
    Join Date
    Apr 2005
    Location
    Kelso Washington
    Posts
    451
    that was FUNNY
    Real guns shoot at least an ounce of lead

  5. #5
    Boolit Master slughammer's Avatar
    Join Date
    Mar 2005
    Location
    SE PA
    Posts
    787
    14. E-Z OUT BOLT AND STUD EXTRACTOR: A tool that snaps off in bolt holes and
    is ten times harder than any known drill bit.

    Unfortunatley, I'm familiar with this problem.

  6. #6
    Boolit Bub
    Join Date
    Mar 2005
    Location
    south of St Louis Mo/ Springville Tn
    Posts
    34

    Talking

    Waksupi : You crack me up. Your words of wisdom ring so true.....8mmshooter

  7. #7
    Moderator Emeritus


    Join Date
    Mar 2005
    Location
    SW Montana
    Posts
    12,500
    Red Green would be proud to know you. Gianni.
    [The Montana Gianni] Front sight and squeeze

  8. #8
    Boolit Buddy
    Join Date
    Apr 2005
    Location
    Kelso Washington
    Posts
    451
    25. TWENTY TON PRESS : used by the grandkids and neighborhood hoodlums to flatten stuff that you prefere that they dont flatten i.e. $300 worth of 333 jefferys brass.
    Real guns shoot at least an ounce of lead

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check