My Remington 700 ADL 3006 is set up for cast boolits w/20" bbl, fresh crown, lt weight poly stock, Lyman 48c and Thompkins globe front site. Real tight chamber from the factory.
I am using a Lee 303B mold sized .311 and it works well with 29 gr IMR4895. But I also have a lot of IMR 4064. Averages about 2 moa, depending on how my day goes, w/the 4895 to 100 yds.
Looking for range of loads using 4064 to give me about 1800 to 1850. I do not have a chronograph. Anyone with experience w/4064 and 185's?
Thanks
seabreeze