I have misplaced my allen wrench and need to adjust the crimp for my .44 magnum die. I need to buy one and need the size.
Thanks for your assistance!
I have misplaced my allen wrench and need to adjust the crimp for my .44 magnum die. I need to buy one and need the size.
Thanks for your assistance!
3/32"
It's only hubris if I'm wrong.
Yup, what he said.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
Call RCBS and they will most likely send you one free. james
I bought a set of good quality ones just to keep on my bench. A few other things require a different size.
I must have four sets kicking around, all missing the 3/32"! They are all buried in the junk.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
of course Wayne, its the one you need that is always missing. james
Put a magnet on the side of your press or on the mounting plate and keep track of little magnetic tools like that.
a m e r i c a n p r a v d a
Be a Patriot . . . expose their lies!
“In a time of deceit, telling the truth is a revolutionary act.” G. Orwell
I like the bhondus ball drivers sets. The ball end allows you to drive at up to a 30 degree angle if needed. Another nce set is the crewdriver type allen drivers.
Any reloading room should have more than just one wrench of the proper size ... combo sets in SAE & Metric. They are cheap at Harbor Freight and never a need to post what size - just go to the combo set and find the right one
Last edited by John Boy; 04-14-2017 at 08:02 PM.
Regards
John
Find a friend that has auto repair shop or whatever where the Snap- On or Mac tool truck comes every week. Buy the self contained set with a range of sizes. You get leverage with them, have standard and metric that are 25- 30 years old, work like a champ.
10-x
NRA Endowment
H.R.M.S.
N.F.A.C.
RVN Veteran
VFW
"The short memories of the American voters is what keeps our politicians in office"------Will Rogers
I like the idea of the magnet. I will be putting one on the side of my bench. I am always digging thru the mess to try and find one, and I know i have several. Kind of like the gremlin that lives in my dryer and keeps eating one of my socks. lol
Find a dead microwave, take it apart inside the cooling fins is the strongest magnet pair you'll ever see. If you put one on either side of your open hand they will stick like a hand sandwich.
NRA Life
USPSA L1314
SASS Life 48747
RVN/Cambodia War Games, 2nd Place
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |