i left out that the drill bit is from the lyman flash hole de-burring tool.ou can use the RCBS or other flash hole de-burring tool.
As a follow on to this 25acp discussion, I contacted kywoodwrkr, and asked him for an address to return his development dial plate and pin set. He said to hold onto them. He was going to revisit that project another time.
So, I have his development plate and pin set that I would offer up to anyone wishing to complete that project for the 25 acp. I don't have any machining ability here, so the parts in progress aren't doing me much good.
If you are reloading for 25 acp, and would like to work on this for your Dillon 550b, please send me a pm, and I'll work with you to get the parts sent along to the next person.
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
Rick459,
Have you weighed a Unmodified factory round and compared your Hollow Pointed one's weight to it? I am curious how much weight "Loss" is involved in the Drilling.
Best Regards,
Chev. William
Last edited by Chev. William; 05-06-2017 at 07:29 PM.
Quiet Period on this thread.
Chev. William
Chevy William
just weighed some up just now and the and the PMC factory round before HPing Going is 80.5 grains. after HPing Going the weight is 79.1 HTH.
Rick
Sent from my SAMSUNG-SM-N920A using Tapatalk
Last edited by Rick459; 06-29-2017 at 09:36 PM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |