I bought a used Star Sizer off eBay and it's pretty beat up. Looks like the lever that pushes on the high pressure piston is homemade, tons of slack (lever actually touches the base of the sizer on the down stroke), and the collar that the high pressure lever is pinned to and goes around the lube reservoir rotates a little around the reservoir after a few cycles so things get out of alignment. Another thing is the brass shaft that the handle connects to has wallowed out so the handle has some play. I'm thinking I might just sell it and buy a new one, I want the speed of the Star press not a collector. Thought I'd check if anyone new of a source for replacement parts.