Got this from a friend of mine for near nothing.What a sight to behold it was.Varnish on the stock,metal,everything,chip out of the buttstock where it meets the stock.Just a real bubba special.What attracted me to it was the sporter stock and the floorplate magazine and the pristine bore.Went in my safe for a couple years.Finally got around to researching it and discovered the maker and the barrel.At this point,I decided it was worth making it presentable.I stripped the finish, steamed thedents and applied eleven coats of finish mudding it in to baby butt smooth.Fitted a hogue pad,and took all the machine marks and Nick's out by draw filing the metal.Polished it up,and cold blued with oxypho blue.The action was left in the white.The poor stock looked like it was attacked by an ice pick and the bolt knob appeared the be beaten by hammers.Going to replace the sights with some nice express sights soon.The target was at fifty yards with prvi ammo.Finally got them down near the bull in a nice group.I also bedded it with accraglas and got lucky with the original bed.This is pretty hard with out experiments on Enfield.I thinks it looks pretty good for an investment of $125.00 total