havi g trouble installing plunger in tube its so tight can't push it in the tube wondering if the rubber on end of plunger is bad have air cylinder but like to go back to standard plunger
havi g trouble installing plunger in tube its so tight can't push it in the tube wondering if the rubber on end of plunger is bad have air cylinder but like to go back to standard plunger
It may have swelled up from non use, try putting a little lube on it such as oil or a little lanolin, maybe a little heat to warm it and make it more pliable. Let us know how it goes.
NRA LIFE MEMBER
ILSA MEMBER
NRA RANGE SAFETY OFFICER
I lube the skirt of the seal with STOS clear grease. That makes it easier to install and remove. It also helps if the machine is warmed up first.
Hope this helps.
Fred
After a shooting spree, they always want to take the guns away from the people who didn't do it. - William S. Burroughs.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |