My online order arrived on Friday,
Your double wrapped package was delivered damage free.
I'll be using a stick or two tomorrow Sir.
Thanks from Indiana, Postell.
My online order arrived on Friday,
Your double wrapped package was delivered damage free.
I'll be using a stick or two tomorrow Sir.
Thanks from Indiana, Postell.
Just a quick Thank You to the good folks at White Label lubes. I ordered a jug of 45/45/10. It arrived quickly, well packaged, and the container is nice and airtight. Very good performing lube.
"Things sure are a lot more like the way they are now than they used to be." --Yogi Berra
I use Carnuba Red for my rifle bullets. Works great.
I am new to all of this stuff. I have only loaded my cast boolits for .38 so far but want to do .357 and 9mm now. I am thinking I should order BAC and CR to try out first. Feel free to let me know if I'm screwing up here.
Either will work, I still need to use a little heat with BAC in my Star Sizer, but my basement is probably cooler than average in both summer and winter.
I need a little heat with Carnuba Red.
9mm mp mould 125gr .356 size carnuba red... works nice!!!!
Last edited by el general; 01-20-2017 at 12:15 PM.
I am looking to buy more carnuba red, but i have no answer.....
I always order from their web store. http://www.lsstuff.com/store/
Last times... i ordered from the web store. But i havent answer....
i sent a private mensage and i haven't answer. I don't know what can i think about this....
El General, I'm sorry for the lost messages. PM sent
Just let me know if there is anything you need.
Thanks
Glenn.
Thanks a lot Lar45. Request sent.
I'm a big fan of White Label BAC lube. I load so many different calibers that I just couldn't afford that many dies for my Saeco lube sizer and the size I need isn't always available. I use the NOE bushings in their size die or the Lee push threw dies on most rounds. BAC lube works better than any lube I've tried for pan lubing,It's very tacky and stays put in the grooves real well so for me it's either powder coat or BAC. Great product. Gp
My order arrived today. Nice!!!! Thanks a lot!!!
I tried for the 1st time some Carnauba red on 335 grain LBT .452 at about 27K psi. Perfect. No smoke, no leading. Just sent in another order for 24 hollow sticks from their web store. Glenn has it down. He gets my biz!
I used Lyman 4500 with heater warmed up for 1/2 hour.
All i can say is, I wish everyone in the industry was as easy to work with as these guys.... extremely helpful and saved me a packet on postage to Australia , let me post a bunch of sizers to his place to pack in with my lube...
I finally broke out my lyman 450, haven't used one in years cause I started using the 45/45/10 mix for my pistol bullets, and wasn't keen on using it on rifle bullets. Used some lyman orange magic because that's what it came with (used). After reading through this thread, I ordered some carnauba red for all purpose bullet lube.
Will still use the 45/45/10 for most pistol though.
Has anybody used the White Label lube for cast lead bullets in BPCR and if so possibly made comparisons with other BPCR lubes ? Has anybody ( other than John Boy , as it was his post on another forum that alerted me to this lube in the first instance ) used GATEFEO'S lube for BPCR , particularly over 200 yards plus in a dry and warm/hot climate ? All replies appreciated.
The other day I read about another lube suitable for both BP and smokeless , and for both handguns and longarms , it is a 50/50 mix of beeswax and Crisco ---- I dont know if the salt-free Crisco is preferred , but that would be my choice . The article was written by Mr. Driftwood Johnson in The High Road site , and as I/m only interested in BPCR , I found his article very helpful and informative .
Great thread.Very useful information.
Good luck.Have fun.Be safe.
Leo
People never lie so much as after a hunt,during a war,or before an election.
Otto von Bismarck
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |