For the .35 Remington, would a one get a short neck expand die or a long neck expand die?
Thanks
For the .35 Remington, would a one get a short neck expand die or a long neck expand die?
Thanks
At one with the gun.
I'd order the short; the long would be for .35 Whelen-length cartridges.
Service members, veterans and those concerned about their mental health can call the Veterans Crisis Line to speak to trained professionals. To talk to someone, call 1-800-273-8255 and Press 1, send a text message to 838255 or chat at VeteransCrisisLine.net/Chat.
If you or someone you know might be at risk of suicide, there is help. Call the National Suicide Prevention Lifeline at 1-800-273-8255, text a crisis counselor at 741741 or visit suicidepreventionlifeline.org.
Concur with Beau. I use the .35 short for my 35 Rem loading.
Sent from my LG-H820 using Tapatalk
I'm frugal, (that sounds better than cheap) I use the one from my .357 die set.
Robert
Get the short.
I would use the long 35 rifle plug in a medium length to short die body.
EDG
Individual caliber M-Dies at $22 each can run into some good money if one shoots multiple calibers, which I do
Track of the Wolf expander plus with the Lee Expansion die ... the plugs for $3 bucks a pop ... one time purchase Lee die - $10 bucks results in a substantial savings
https://www.trackofthewolf.com/list/Item.aspx/1221/1
https://www.trackofthewolf.com/Categ.../LEE-DIE-45-EX
Last edited by John Boy; 09-28-2016 at 06:23 PM.
Regards
John
I use the short one, midway lists this as "for the .35 remington" and I agree that it is correct for it.
I have used the 9mm m die also, before my .35 m die came in, and it kind of worked but I later found out that it is not a wide as the rifle one (I think it's .356 instead of .358 or so) and that explains why I had minor lead shaving with it. So, I would recommend the short rifle die.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |