6 inch diameter pipe 8 inches tall with bottom and legs welded on it. made a valve in bottom like the lee pot. the bolt in bottom is a 3/8 bolt with a 1/8 hole drilled through. used a steel countersink bit to bevel hole afterwards. 2-1200 watt band heaters 220 volt. wrapped with 1 inch kaowool and header wrap on outside to hold it all together. it took 20 minuts to melt 15 pounds of bullet rejects. no leak from valve yet. 15 pounds of lead after melted was at a depth of about 1 inch in bottom. i know it looks bad but it works. will post video once i finish pid of it in operation.
Attachment 166571Attachment 166572Attachment 166573Attachment 166574Attachment 166575Attachment 166576Attachment 166577Attachment 166579Attachment 166581Attachment 166582