Good video but wouldn't it be just a litte more efficent to use the pro auto disk with the Lee expander? Seems like the guy is missing the system's intent.
"It is better to die on your feet than to live on your knees" Looking for an RCBS Ammomaster and H&R shotgun barrels regardless of condition
Too many tables to refer to, I like going with a specific weight of any powder instead, one that can be worked up to @ .1 g. @ a time until I get the speed I want and don't get into any pressure signs. One of my loading/pards uses the auto disc and had to modify/refine it until it would stop being messy with collected powder under the slide and so forth so another reason I preferred the 'throw' type. I know they only throw around the weight you set them for but I stay away from max. loads using a throw. With the .308 I patiently wait for my RCBS auto dispenser to do the job and trim it just right with the trickeler.
What is the systems intent? I missed that.
--ISO ITEMS--
Contender super 16 barrels
updated as of April 2023
My feedback: http://castboolits.gunloads.com/show...ight=Carbine86
very clever...and simple.
~~~~~~~~~~~~~~
“If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
― The Dalai Lama, Seattle Times, May 2001
I think that'll work.
Don't forget the raised lip screwed to the edge of the table for those plastic bins to hang from so the bullets just drop into them.
--ISO ITEMS--
Contender super 16 barrels
updated as of April 2023
My feedback: http://castboolits.gunloads.com/show...ight=Carbine86
OS OK, thanks for the spring idea.
I saw you post it before, but forgot who it was.
I will be picking a few up, sizing 45 isn't too bad, but did some 9mm the other day and was wishing for a spring.
Never thought of just sticking the Boolit into the die, may try that also.
Nice to have so many solutions to choose from.
Thanks…mjwcaster…don't you wish all the handloading 'geniuses' all lived in the same neighborhood…the wives could never track us down or where we were at any one time…drink lots of cold beer, stagger home each evening with a pocket full of new boolits and a head full of new ideas.
Sorry…my minds tends to wander at this age!
I went to the hardware store the other day looking for a suitable spring. Scored a big goose egg. Nothing even came close.
,,, stupidity comes to some people very easily. 8/22/2017 Pat Lengyel (my wife) in a discussion about Liberals.
Sorry…I wish I knew what to tell you other than keep looking. If you score another 'goose egg' they make a great breakfast but you'll need about 4 pieces of toast to sop up all that yoke!
I've eaten turkey eggs, quail eggs, pheasant eggs, duck eggs and of course chicken eggs ... but never a goose egg. I trust your advice on the toast.
,,, stupidity comes to some people very easily. 8/22/2017 Pat Lengyel (my wife) in a discussion about Liberals.
I have two old "C" presses that work on the up stroke.
Would be easy to make a stand to mount it "up-side-down" to size on the down stroke.
Probably over kill for just sizing.
I run a tube from my die to a bucket on the floor makes it so I don't have to empty the red Lee die box
--ISO ITEMS--
Contender super 16 barrels
updated as of April 2023
My feedback: http://castboolits.gunloads.com/show...ight=Carbine86
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |