My firearms project blog
Zero interest in them. None, nada, zip, zilch. Although Nobade does have a good point.....
Here are some items being sold by one of our site sponsors! Ii've bought a couple and they work great!
http://www.titanreloading.com/powder...-powder-baffle
http://www.titanreloading.com/powder...n-micro-charge
http://www.titanreloading.com/reload...-finger-wrench
http://www.titanreloading.com/press-...n-primer-chute
http://www.titanreloading.com/press-...rimer-director
http://www.titanreloading.com/press-...n-tube-harness
Nobade Beat me to it!
Randy
"It's not how well you do what you know how to do,,,It's how well you do what you DON'T know how to do!"
www.buchananprecisionmachine.com
I'd make the cutoff lever for my neighbors 71/84 Mauser. Everywhere I look they are Out of Stock. Would also make parts for a shooter at the gun club who is paralyzed from the mid-back down. He needs special parts to be able to pull the trigger and although I can make them on a mill, a rotary table would make them better. And I don't have a rotary table. The guy shoots skeet and has to rest the forend on the back of his left hand and has to pull the trigger with the back of his right hand. I make the trigger extensions that extend out the side of the trigger guard.
The only amendment the Democrats support is the 5th.
Large bore single-stack AR mag followers, primer catch tray for Lee Pro 1000, labeled holder for brass expander plugs, misc soft parts, small scale media separator, toys for the kiddos.
My neighbor has using my mill and lathe for building an R2D2 robot in my shop.
He as ~ $30k into it.
He bought a 3D printer and has made some parts.
The female threads smaller than 1/4-20 do not print well.
We are still doing convention drill and tap on small holes.
Yep, I know - I posted it when Jerry added it to his channel
http://castboolits.gunloads.com/show...sive-young-man
je suis charlie
It is better to live one day as a LION than a dozen days as a Sheep.
Thomas Jefferson Quotations:
"The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government."
I have seen the primer catchers for RCBSC, but the Redding Big Boss II and Lee Classic Cast have a hollow ram. Even with this system primers pop out the priming arm slot fairly regularly. I do not want to close it up as I am going to use it. Right now I stick a piece of foam in there, but I think a small piece could be printed with a lip that slides into the top of the ram right behind the shell holder so it would not fall down the ram.
Dummy rounds/snap caps, length gauges, O.A.L. cartridges to speed up die set up, trim fixtures, non-marring jags for gun cleaning, colored sight inserts for AR and others, HP drilling fixture, barrel cleaning guides, heck you could make your own volume type powder dispenser/measure with custom charge bushings, there are endless opportunities.
First I would build, another 3D printer to have in reserve for when I wore this one out.......
NRA Benefactor
A primer deflector for my Lee single stage press that doesn't have the arm on the side and priming attachment. So it stays in place and just deflects primers when I am depriming. I could just grind the unused bits that come with the press but it seems like a waste. Or Mr Lee could make one and sell it for very little.
A ceiling mount bracket for our epson projector.....new apartment has some quirks were trying to deal with still.
I'm still wanting a 3d printer and after seeing a metal laser engraver I would like one of those as well. Be a good way to mark my magazines for matches. Right now we just use paint pens and that lasts for a little while but its far from idea.
Last edited by wonderwolf; 08-29-2016 at 03:27 AM.
My firearms project blog
Diamonds! all it takes is Carbon for a media.
Randy
"It's not how well you do what you know how to do,,,It's how well you do what you DON'T know how to do!"
www.buchananprecisionmachine.com
The LoaderTools group on Facebook is run by a guy that sells 3D printed stuff. Most of it I have seen other places, but he did have primer directors for the cutout in my Redding Big Boss II.
Misuse of 3D printers can be disastrous.
https://www.youtube.com/watch?v=69SsHvZ5Vsk
Holsters?
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |