anyone know where I could find a load for rel 7 to push a 405gr .458 rnf to 1300-1400fps?? not in my lee 2nd edition
anyone know where I could find a load for rel 7 to push a 405gr .458 rnf to 1300-1400fps?? not in my lee 2nd edition
An armed man in a citizen.
An unarmed man is a subject.
A disarmed man is a slave.
Quickload is saying 33-34 grains RL7 for a 20 in barrel.
Cartridge : .45-70 Govt. SAAMI
Bullet : .457, 405, LYM LFN 457193
Useable Case Capaci: 54.841 grain H2O = 3.561 cm³
Cartridge O.A.L. L6: 2.550 inch = 64.77 mm
Barrel Length : 20.0 inch = 508.0 mm
Powder : Alliant Reloder-7
Predicted data by increasing and decreasing the given charge,
incremented in steps of 2.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !
Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms
-20.0 65 32.00 1340 1614 15024 2861 85.4 2.045
-18.0 67 32.80 1372 1692 15978 2958 86.6 1.987
-16.0 69 33.60 1404 1772 16982 3053 87.8 1.932
-14.0 70 34.40 1435 1853 18037 3146 88.9 1.879
-12.0 72 35.20 1467 1935 19146 3238 90.0 1.829
-10.0 74 36.00 1498 2019 20311 3328 91.0 1.780
-08.0 75 36.80 1530 2105 21535 3416 92.0 1.734
-06.0 77 37.60 1561 2192 22820 3501 92.9 1.690
-04.0 79 38.40 1592 2280 24170 3584 93.7 1.647 ! Near Maximum !
-02.0 80 39.20 1623 2369 25587 3664 94.5 1.606 ! Near Maximum !
+00.0 82 40.00 1654 2459 27075 3741 95.2 1.567 ! Near Maximum !
+02.0 83 40.80 1684 2551 28636 3815 95.9 1.529 !DANGEROUS LOAD-DO NOT USE!
+04.0 85 41.60 1715 2644 30276 3886 96.5 1.493 !DANGEROUS LOAD-DO NOT USE!
+06.0 87 42.40 1745 2737 31998 3954 97.1 1.458 !DANGEROUS LOAD-DO NOT USE!
+08.0 88 43.20 1775 2832 33806 4018 97.6 1.424 !DANGEROUS LOAD-DO NOT USE!
+10.0 90 44.00 1804 2928 35704 4079 98.1 1.392 !DANGEROUS LOAD-DO NOT USE!
Results caused by ± 10% powder lot-to-lot burning rate variation using nominal charge
Data for burning rate increased by 10% relative to nominal value:
+Ba 82 40.00 1740 2724 32815 3753 99.2 1.449 !DANGEROUS LOAD-DO NOT USE!
Data for burning rate decreased by 10% relative to nominal value:
-Ba 82 40.00 1542 2138 21627 3557 87.7 1.722
thankyou!
An armed man in a citizen.
An unarmed man is a subject.
A disarmed man is a slave.
In a Ruger #3 (22" barrel, I think), I get 1420 fps with 35 grains Reloder 7 and Lyman #457193 plainbase flatnose, 420 grains wheelweight alloy.
thanks again guys , I think I have decided to go with imr4198, it takes 30grs to launch a 405gr boolit to 1370ish, and everything has a 4198 load listed. good day to everyone
An armed man in a citizen.
An unarmed man is a subject.
A disarmed man is a slave.
You really need to get yourself a Lyman Cast Bullet Handbook.
do they have a lot more load info, and also do they have more info on casting,cast loads, etc.?
An armed man in a citizen.
An unarmed man is a subject.
A disarmed man is a slave.
I stopped in Barnes and Noble the other day, and while browsing around I came across the Hodgdon 2016 Annual Manual. If you can find Varget or H4895, it has loads exactly in the velocity range you're looking for. The max load of H4198 gets close to, but not quite as fast as you're looking for.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |