I'm looking for some suggestions to use 2400 with a powder coated Lee 452-255-RF.
This will be with a 45colt case used in a Blackhawk 454casull and a 1892 Winchester.
Presently I'm loading a 250gr XTP with 18.0gr of 2400 using magnum primers and am getting about 1100fps out of the 6 1/2" revolver and 1440fps out of the 24" rifle.
I would like to be above the standard 45colt velocities but below the 454casull, close to the present load I'm using.
I would appreciate any input, thanks.