My star has gotten turned some how and I have no idea how, why or when, I notice this morning before work something just did not look right. if you look at the breakdown s111 and s112 have moved to the right, it has moved to where s112 is hitting only about a 1/4 if the plunger s124. can anyone tell me how s111 is installed, is it a taper fit, a press fit or what, I see no set screws holding it and do not want to break anything trying to move it back. I really think everything should be lined up and running true in order for everything to work properly. I am not 100 % sure but all the other parts and shafts look to be lined up correctly. The handle moves freely and still sizes boolits ok but it is just not right and I would really like to have it centered up correctly. Thanks for any help or insight you fellows may have.
http://www.magmaengineering.com/PDF/Star_Sizer.