Hey folks. In my last post, I mentioned that I had recently purchased a Pedersoli rolling block. It came with a Pedersoli globe sight. I'm not a huge fan of those because I due quite a bit of shooting at indoor ranges (despite having next to no reloading supplies available locally, we do have a 50-yard and 100-yard indoor ranges). I'm able to modify the Lyman front globe so I can actually shoot it against a dark background.
Anyway, it also came with a generic rear tang that I've seen before on other guns. I think it's a Pedersoli, but the closest I can find online is this - http://www.dixiegunworks.com/product...oducts_id=7543
You have to loosen the eye cup to make either windage or elevation adjustments. The eye cup screws into a small sliding bar that moves left and right for windage.
So first I'd like to know if anyone knows the threading of the eye cup off the top of their head. I thinking it's 10-32, but I don't know for sure. I was thinking I could buy a Hadley for it, while I save up for a better sight.
Secondly, there's a lot of things I don't like about this sight. It doesn't maintain it's windage adjustment when you make elevation adjustments. There's a ton of flex in the mechanism when you tighten down the eye piece. Is there anyway to make this sight more functional? I've tried keeping the windage adjustment in place with a magnet, but that doesn't work very well.
Open to any and all suggestions.