billy
you are getting too close to the casting equipment.
you cannot make" fire in the snow, with lead"
billy
you are getting too close to the casting equipment.
you cannot make" fire in the snow, with lead"
I Am Trying To Keep The Snow Fires At A Minimum.
well here she is.
i havent loaded anything yet but i did get it real close to ready.
$550 grand total.
![]()
Bill nice buy and nice setup. you will be loading in no time. What was the final list of calibers and what do you have you want to trade for something else?
Nice deal Bill! You certainly got some nice stuff. Most of those cartridges are the usuall stuff and are great for a starter set. Looking at your other post I see you have figured out about swapping different shellplates / pins / powder funnels to make what you want. I made a chart in excel that works for me.
R.
BTW, I would have bought that set-up in a heartbeat, good catch!
"The only way to deal with an unfree world is to become so absolutely free that your very existence is an act of rebellion."
- Albert Camus -
I've owned my 550 for 8 years and haven't accumulated that much stuff....don't leave home for very long![]()
thanks for the kind words.
8mm dies
.38 dies
.357 dies
.45 acp dies
30/06 dies
.308 dies
.30 carbine dies
.44 mag dies
.32 S&W long Dies
9mm dies
.223 dies
7.62X39 dies
.380 ACP dies
13 die stands
13 tool heads
13 die tool heads
303 brit
45 long colt
454 casull
dies
i dont need
30 carbine
380
32 s&w long
i need the plate and the funnel for
45 long colt
p.s.
i ended up with dies for every caliber of firearm i own except 7.62x54r
i NEVER thought that would happen!
I have two 550Bs and a SDB, both are champs in my book. I started with a 450B. Plus I have a Rock Chucker for a single stage press.
These have not failed me ever and the Dillons have a no BS warranty.
Jerry
Honor is a Way of Life
NRA Benefactor Life Member
well they must be OK if you have TWO of em jerry!
Ive got in addition to the Dillon an old Lyman all American turret and a lee single stage.
Ive got the evolution of my reloading hobby bolted to benches in my reloading room.
p.s. that Lyman is one solid piece of machinery.
it's probably as old as i am and i am turning Grey.
I bought my first Dillon RL 550B just a few months ago. I bought it new. I'm using my RCBS and Lee dies and it does a good job. You made a great deal with all of the extras that you got.
dillon 1st impressions.
OK i set it up for 45acp.
and made 5 rnds.
this thing is a piece of cake to operate.
i only made 5 because i want to see how my 1911a1 likes this ammo.
i did it as slowly as i could so i could very carefully make sure everything was hunky dory.
it was.
i have never fired lead through this pistol but these rnds. feed through it just fine.
if these work well i am going to load up the other 995 bullets.
there was a tiny amount of lead shaving.
i think it may be inconsistency in the bullets.
this camera takes some dandy pictures!
![]()
Last edited by unclebill; 05-24-2008 at 06:02 PM.
the plate is on it's way.
it should be here today.
yep this is pretty cool!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |