I'm going to be loading up some 30-30 rounds using cast bullets from my new NOE 195gr copy of the rcbs 180 mold.
Data is few and far between for projies that heavy and the only data I can find is in the lee manual and for accurate brand powder that isn't available around here.
The powders that I do have are Reloader 15 and Reloader 10x which I have a few pounds of. I was thinking of using the 170gr data from the alliant website and reducing it by 20% as a starting load with Rl10x. Has anyone else tried these powders with the heavy projies?
I have read the article where the fella used the rcbs bullet and 28gr of varget with good results but I'd rather use the powder I have if possible.
Cheers for any advice!