Pretty amazing Tracvision.
Cool Stuff!
Pretty amazing Tracvision.
Cool Stuff!
TEAM HOLLYWOOD
NRA- LIFE TSRA-LIFE SASS-LIFE
" Metallic".................I wants............
Thanks for the pics Tracvision!
TEAM HOLLYWOOD
Harold
TEAM HOLLYWOOD
Tracvision, keep me in mind when the time comes on the automatic or one of the others. That's just a spectacular collection of pictures.
There's one other Super Turret owner that I know of. Lubedude and I have both spoken to him and he couldn't be nicer. He's restored his Super and it's just spectacular. He has serial number 302.
Jim,
I consider Lubedude a personal friend. We have met in Texas and guess what the conversation was about ??? Wife was bored. !!! Anyway, I am leaving Colorado in a few weeks and need to take any presses with me that one may want. Otherwise, they will be in my shop in Co. until next May.
I have an un-numbered Super Turret that is the prototype. I also have the molds. I don't think I will sell them. Many have asked, but that is in my personal collection. I have 3-4 Metallic autos I will sell and also some shotgun autos. Drop me an email if you have any specific requests or need pix. email here
Once these presses are gone, I wont have a source for more. I hope to get them in the hands of collectors.
Regards,
Harold
Harold
TEAM HOLLYWOOD
.50bmg,
What's the number on the lower right side of the turret along the bottom as you face it? It's a three digit number that begins with 3 in most cases.
And, like everyone else, congratulations on joining the club, the Super club!
Best,
Jim
Wow Tracvision! You have some of the casting molds too. (alteast I think that's what those are) That is cool!!
What a great collection!
Those are for sand castings and are typically called patterns.
Had a room full of them (the Pattern Room) in the MGM Machine Shop. They were made by the Mill and used in the Foundry to produce set pieces for movies like "Gone With the Wind", "Torpedo Run" and many others.
It's very cool that you got the patterns for the castings.
A well regulated militia, being necessary to the security of a free State, the right of the People to keep and bear arms *shall not be infringed*.
"The greatest danger to American freedom is a government that ignores the Constitution."
- Thomas Jefferson
"While the people have property, arms in their hands, and only a spark of noble spirit, the most corrupt Congress must be mad to form any project of tyranny."
- Rev. Nicholas Collin, Fayetteville Gazette (N.C.), October 12, 1789
Smokey, Thanks for that info. I have the molds , but know nothing about using them. I just figured I would put the mold behind each press in my collection. I would be interested in how the process works. I have the molds for most of the presses and accessories that Hollywood made. The Senior Turret mold is wood and so are a few others.
Harold
TEAM HOLLYWOOD
Harold, by the time I went to work at MGM the foundry had been shut down and demoed 10 or 15 years earlier. But, I do remember being told that the sand was very fine and I would think it would have to be somewhat damp to hold shape. The pattern was pressed down into the sand, carefully lifted out, then the molten metal poured in. You would definitely need to study up on it if you wanted to produce castings.
Some of the patterns I had in the pattern room were identified as door hardware for Terra, the Southern mansion from "Gone With the Wind", a submarine hatch from I think "Torpedo Run" and a host of other patterns from dozens, if not hundreds of other MGM movies. MGM also cast their own printer beds (like a lathe bed), plus built their own camera cars and camera dollies.
The Mill and Foundry were so busy from the '30s through the '50s they had their own railroad spur line to supply materials.
A well regulated militia, being necessary to the security of a free State, the right of the People to keep and bear arms *shall not be infringed*.
"The greatest danger to American freedom is a government that ignores the Constitution."
- Thomas Jefferson
"While the people have property, arms in their hands, and only a spark of noble spirit, the most corrupt Congress must be mad to form any project of tyranny."
- Rev. Nicholas Collin, Fayetteville Gazette (N.C.), October 12, 1789
Smokey, I find it very interesting that both MGM and Hollywood Gun Shop used the same method, in the same geographical location. I wouldn't be surprised if Lyle Corcoran knew some of the workers at MGM. I have pictures of movie stars from that period, in his shop. It would be cool to make the historical connection.
Come to think of it, I think I have a glossy with Clark Gable at the front display area. I'll check my Florida collection when I get home in a few weeks. ( re: Gone with the Wind )
Last edited by Tracvision; 09-21-2015 at 09:39 AM.
Harold
TEAM HOLLYWOOD
Sand casting has been used for centuries and is still in pretty wide use today.
I have a pretty interesting story about Gable, told to me by a MGM alumni from the '50s. PM me if you're interested.
A well regulated militia, being necessary to the security of a free State, the right of the People to keep and bear arms *shall not be infringed*.
"The greatest danger to American freedom is a government that ignores the Constitution."
- Thomas Jefferson
"While the people have property, arms in their hands, and only a spark of noble spirit, the most corrupt Congress must be mad to form any project of tyranny."
- Rev. Nicholas Collin, Fayetteville Gazette (N.C.), October 12, 1789
Sand casting has been in use since at least the 1500's. Lost wax is used for parts requiring higher tolerances but it is still very commonly used today.
Lost wax was mostly a jewelry process until Bill Ruger started using it. Ruger has an industrial division that does non-firearm lost wax as do may other companies. Aerospace, auto and general industry use a very large amount of lost wax.
For a one of sand cast will be way cheaper. With having the patterns a sand cast will be very cost effective. One of machining will be a shocker unless you can find a good retired machinist or tool maker with a shop that would be willing to trade machining for an extra casting or two.
http://www.thomasnet.com/florida/san...2521209-1.html
http://www.zycon.com/Products/US-FL-.../Castings.html
Good read on the Hollywood's here http://www.google.com/url?sa=t&rct=j...YA3ejxrdOjph3Q
Last edited by M-Tecs; 09-21-2015 at 04:42 PM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |