I'm having some issues with my Mark x. The learning curve with a machine like this is pretty steep and I know the machine a lot better than when I got it month ago.
I have casted a lot of good boolits but lately a new problem has occurred. Regardless of which mould seated in two of the "arms" I get half filled boolits and rounded bases at best. The moulds seated in the other two stations produces perfect boolits. It seems to me that this is an alignment issue under the pot. I've played with the pin on the back of the machine and moved it left and right to get the sprue plate to set at different places just ti try it, but with the same result. 2 sets with god boolits and 2 bad at one turn.
I've had some other problems as well but the customer support at Northern Valley Machine is incredible so they have all been sorted out, fast and smooth. Before I bother them more with my questions I hope someone her may have some suggestions. I have taken every measurement I can think of and can't see any sollution to this problem. I may have to change out two of the arms holding the moulds, or whst do you guys think?
Thanks