Finnaly have some pictures of the dies that I am making along with one of my "rough" test targets. No load work up was done just a start load to prove function and operation. The cartridge was 357 max with 20 gr H110 . Chrono'd @ 1550 fps from a 14" tc.@ 25 yds, the grids on the target are 1/2" and while I am certain I will do better with optics this is about as good as my eyes work when tired. The slugs fired for the test were 180 gr truncated cone ( short point formed ) I have also made 148 gr hollow point as a proof run , and also a jacket notching punch ( internal ) . These are threaded 5/8"-24 tpi I will also be doing them threaded for the Walnut hill press as well.