Winchester autocomp in 10mm

[45r]

Got some of this powder and not much data for 10mm use.
Want to try it 10mm and 9mm.
Any preferred loads out there.

[harley45]

I tried the 7.0 gr load under a 200gr boolit I got off Hodgdons website and it gave me about 125 fps out of my 5 inch 1911. Burned clean and was accurate should make a decent hog load.

[Vann]

I bought a pound to try in my G17 and S&W 1006, but I haven't tried it yet. I'll be watching this thread intently.

[45r]

Shot some Powder Coated accurate mold 452220E FP boolits over 6.1 grains autocomp in my 45acp.
45 dies were ready to go.
they went inch and a quarter at 20 yards offhand.
If 9mm and 10mm loads shoot like that I'm going to get more of this powder.
I've read that it's Win factory powder.

[Ruger45Bisley]

I don't have much, but here's a little for the 10mm (Glock 20):

180gr PD FMJ, 7.8gr AutoComp @ 1.250": 1,176 fps avg
200gr Rainier RNFP, 7.0gr Auto Comp @ 1.250": 1,088 fps avg
200gr Missouri Steeler, 7.0gr AutoComp @ 1.250": 1,147 fps avg