I think I am on the wrong path. I am building a 300 Blackout and I was going to put a adjustable gas block on a 16 in barrel. I think or maybe thought that I could open it up and get more gas to cycle cast bullets if I did not have a hot enough load or my bullet was to slick to build up enough pressure to cycle the bolt. Then I read some where it is to limit the gas, not get more.
Before I spend the $$ on a do-dad I will never use I figured I would ask here as Jacketed guys have no clue in most cases. I plan on giving powder coating a go as it seems interesting as I get back into casting.
Thanks in advance on help building my first and maybe last AR... JB