Im reloading some 12 gauge on a load all 2. this is the load.
green rem hulls
12s0 claybusters
1oz drive key slug
35 grains steel
cci 209
The problems i have is that the primers seem to be sticking out slightly. its not a max charge of powder either, if its compressing too much. some of them hang fire as well, im thinking that has to do with the non flush primer. My crimps are unfolding on about 10-20% of the finished rounds. Ive only reloading about 50 of these and found the unfolding about 1-2 days a later.
these are factory loads and they seem to stick out just as much as mine.