Alright, not lied but didn't realize I could make it work. I stated earlier that I couldn't make a 300 gr bullet shoot within my elevation adjustments on my 44 blackhawk. Well I took some things that I've learned over the past couple of years and tried it again with the lee 310-430 and wouldn't you know it I'm only about 2 in high at 35 yards. By working up to 44man's load (well a half grain under) I'm getting my best groups yet.
Now it's time for an issue I'm running into and my question on how to solve it. I noticed yesterday at the range that I had a few flyers that I just thought was me until i was plinking at 10 yards. At that point I noticed extra holes in the target that looked like it could have been the gc. Apon further inspection I found a gc lodged in the cardboard backing of the target. So if the gc comes off in flight does it affect accuracy? If so what is the best way to remedy this without modifying the mold?