Does anyone know where I can find an RCBS .222 neck reamer or any other reamer that will work with an RCBS reaming die?
Does anyone know where I can find an RCBS .222 neck reamer or any other reamer that will work with an RCBS reaming die?
"Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety".
Benjamin Franklin
Where an excess of power prevails, property of no sort is duly respected. No man is safe in his opinions, his person, his faculties, or his possessions.
James Madison
The correct reamer has a round shank to guide the reamer.
They are so expensive that a neck turning tool is more practical.
The neck turner will turn almost any case and is adjustable.
EDG
I've only reamed necks for the 357 Auto mag using the rcbs form dies. But the run out was greater than what I got from neck turning. I'm guessing even with a snug fitting reamer shank the cutter is following the crooked hole in the case neck.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |