Pro Patria-Ne Desit Virtus
neat little aftermarket primer catcher, I thing someone in S&S sells a similar rig,
Yep, someone on here is making them with a 3D printer. Sorry for not being anymore helpfull
Swaging. Keeping the 40's running for the price of .22's
and .223 bullets for a fraction of a cent!
I found it while searching google. Made contact via email,waiting for a reply.The address was rick@reloadingcreations.I will get me one of these things! The original idea,according to rick was from "Thingiverse".
Pro Patria-Ne Desit Virtus
Another option that has worked for me being that I’m cheap.
I cut a short piece of a drinking straw like from Mc Donald's and slip it into the grove in the ram to funnel them into the original primer catcher . Cut the straw with scissors and play with the length till you get it right. Works pretty good and cheap.
Original 3D drawing can be found here: http://www.thingiverse.com/thing:84047/#files
So, if anybody has a 3D printer it's just to start producing...
I use the foam weather stripping with the one sticky side between the plastic primer catcher and the Rockchucker frame. Holds the catcher tighter to the ram and works well for me. Learned that trick " RITE CHEAR" on Cast Boolits GP
I wonder if this would work on the original RC by turning the ram around backwards? Anybody tried that yet?
Finally something that actually looks like that it was actually made for the RC that works!
TEAM HOLLYWOOD
NRA- LIFE TSRA-LIFE SASS-LIFE
I don't understand how that is supposed to work. My RCBS press kicks the primers out the front of the ram. They would shoot out right in between those two little prongs.....
GoodOlBoy
Yes I can be long winded. Yes I follow rabbit trails. Yes I admit when I am wrong. Your mileage may vary.
Keep your powder dry. Watch yer Top knot.
"Praise the Lord and pass the ammunition!"
Yes there were "Short" 45 Colts! http://www.leverguns.com/articles/taylor/45_short_colt.htm
ah ok.... makes sense. Thanks.
GoodOlBoy
Yes I can be long winded. Yes I follow rabbit trails. Yes I admit when I am wrong. Your mileage may vary.
Keep your powder dry. Watch yer Top knot.
"Praise the Lord and pass the ammunition!"
Yes there were "Short" 45 Colts! http://www.leverguns.com/articles/taylor/45_short_colt.htm
I've been wanting a 3-D printer. Group buy!
My Feedback thread:
http://castboolits.gunloads.com/showthread.php?249515-prsman23
BTW, I have the one from our own Jonny_V, and I wouldn't trade it...
"When you can't make them see the light, make them feel the heat." - Ronald Reagan
starmac,I believe it will do something.1st-it will clean up the press.2nd-you won't dump primers trying pull off the tray to empty it.Just run the hose to a pill bottle.Personally,I like it and have ordered one.I broke the original anyway.
Pro Patria-Ne Desit Virtus
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |