websterz,
Looks like your set on range scrap... for a while anyway LOL!
Those 9mm's look great, good job!
Looked for a 500ct box of starline 45 colt brass I've misplaced.
Loaded 350 rounds of 45lc with a 250 gr Round Flat Nose
Made glue stick wadcutters for indoor practice.......I am in Warminster Bucks County North of Filtydelphia
Cast a bunch of Mihec the other day and today finally got a good technique down for pan lubing.
So far..just sat here at the computer reading a lot of great info on Cast Boolits.gunloads.com.
Had plans to load some 303 British with my 224 gr 316299 knock offs & IMR4320 so reorganized the bench some and swapped out powder in the thrower. Went looking for my large rifle primers and found that I only had exactly 3! How I ended up with an oddball number like that I'll never know. I knew I was getting low but... Mrs. Taco got me a $50 gift card to Midway for Christmas but with the hazmat fees and shipping, $50 won't cover one box of a hundred. Wish I'd stocked up years ago when everything was less $$$!!!
Loaded up 30 100 grain plinkers for my mosin 91/30 and cleaned two rifles. Prepped 45 berdan primed 30-06 brass and trying to decide if I want to use my Remington BDL 700 strickly for cast or shoot both condom and cast in it.
I walked by it on the way out the door to go to work.
Lubed and sized about 300 H&G#68's.
Did 50 Rounds of .338 WM that will, hopefully, get me through the end of the freezer-restocking this year.
Today was clean-up day. Straightened up the bench and put some things back in their place. Then I dumped this years haul of range brass out on a towel, grabbed a hand full of loading trays and went to sorting. Now I'll probably build a fire in the fireplace, mix a drink and kick back. Cheers!
Nothing special,
just cleaning some 38 special nickel plated with my modified concrete mixer.
Nelson
Moved some sizing dies into a new storage box since I have to many for the old box. Went to HF and bought a cutoff saw to make 300 BLK brass. Was setting up the jig when a friend called. Bailed on that for free food and beer at the firehouse because it's Member Appreciation Day
Loaded up 40 rounds of 7.62 x 38. Mixture of Privi and Bertram brass and Privi 98g projectiles over 2.5gns of Unique. Used a M1 Carbine neck expanding die to get correct mouth width. A .310 Cadet shell holder for the Privi brass and Lee 19 for Bertram brass.
Did some cleaning up. Put new brass that I got today in the mail and some from a while back into containers and labeled. Finally put some sizing dies into my drawer I built for them.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |