I picked up a used magma star lubesizer. My question is what is the most effective way to remove the old lube from the press and dies? I cast and coat my own bullets so I won't need the lube.
Thanks
Dusty
I picked up a used magma star lubesizer. My question is what is the most effective way to remove the old lube from the press and dies? I cast and coat my own bullets so I won't need the lube.
Thanks
Dusty
Hair dryer, heat gun, propane torch, use this gently. Leave the sizer mounted to your bench remove the die if any, place some old newspapers on the floor under sizer and heat it. Old lube will drip out quickly.
Paul G.
Once I was young, now I am old and in between went by way to fast.
The end move in politics is always to pick up a gun.
-- R. Buckminster Fuller
read this thread...
http://castboolits.gunloads.com/show...ck-lube-change
wyman
Solvang Shootist
SASS 60905-Life
Frontier Cartridge Black Powder Shooter
Thanks for the replies! I take it that it will be messy.
Dusty
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |