My wife bought her a CAI imported Serbian made AK-47 copy at a gun show a while back. Today, we were trying out some reloads using the Lee 309-155 over 18gr of RL-7 and a CCI LR primer. When she pulled the trigger, much to her surprise, she sent two rounds downrange. Upon inspecting the case, I found the primer was just barely dented on that second round. My first thought was that the disconnector had failed and the hammer had ridden up the back of the bolt. I used to have a friend with an AR-15 that would go full auto without the automatic sear if it were put into what would have been "Auto" position on an M-16. I thought maybe the same thing had happened with the AK. But on the other hand, it may have just been the firing pin slamming into the primer as the bolt went home. What do you think?