It's worth a try. Plenty of people run plain base 9mm that fast with no issues. I'm going to be testing .44mag plain base a good bit faster than that soon too.
It's worth a try. Plenty of people run plain base 9mm that fast with no issues. I'm going to be testing .44mag plain base a good bit faster than that soon too.
ΜΟΛΩΝ ΛΑΒΕ
You will be good to go. We coat black and brick red. I shoot lots of full house 357 and 44 in revolvers and carbines with great success. I chronoed the .44 Henry at 1850 fps with a 240 grn SWC and the super blackhawk at 1290fps. No issues at all.
Is That the Gold 1035 colour?
It is very nice, and seems to have a green hue.
Wait till you see the Candy Apple Red..... It is magnificent, ( even if I say so myself...lol)
A commercial caster here, is supplying me information on use of the Candy Apple with rifle ammo.
From initial discussions, users of cast coated with Candy Apple have reported to manufacturer exceptional results. I am eagerly waiting for those details.
Gunoil,
Hardline Industries mold???? Weight????
What true color is that????
What mix, WET or DRY mix?????
MOONMAN
Looks like hardline and Gold 1035 to me.
The 122k/1035 Candy Apple is a very nice red.
See the photo HITEK put up a few pages back, of my Hardline 45 ammo. that is coated with the Candy Apple and the green ones are the Kryptonite green.
Hooroo.
Regards, Trevor.
Australia
Don't think there is bare lead.
Gunoil coats thin. That is the best coating. Looks fine.
Hooroo.
Regards, Trevor.
Australia
Does anyone know if the Black 1035 powder sold by Gateway has the 2-Extreme catalysis in it?
To answer you in short, No.
The powders that are with Gateway were first production batches, and were based on original recipe, as used in the solvent based systems.
The need was to produce exactly the same results with the powders as being obtained with the liquid systems.
That was achieved.
Then requests came for modified versions, which had to be made and tested.
They also worked well and equivalent to 2-extreme liquid systems.
Now, powders will be available in standard catalyst version as well as 2-Extreme versions.
Hope your question has been answered.
Just a quick add-on to above.
Aside from demands for 2-Extreme powders, we also had some asking about harder, and more durable resin system.
We managed to make a solvent and powder system, that not only worked, but exceeded all expectations with a far better polymer system that also had 2-Extreme properties.
All of these were tested with traditional hand guns and with higher velocity applications.
As advised in my previous blog, I am waiting for test results that I will publish.
Ausglock has been lucky enough to now have and use the resin system for a while, in his Kryptonite Green (liquid form).
He has used 2-Extreme and 3-Extreme catalyst with new resin system with success.
I am told, that all who try his coated non lube grooved alloys, are amazed.
May be he can advise more himself.
Last edited by HI-TEK; 10-19-2014 at 04:53 AM.
Thanks Joe. That was the answer to my question.
If tougher resin proves out it would be something I would be interested in for my rifles. Even though the 44 mag. lever gun has had no leading at almost max loads with the liquid Gold 1035, always looking for something better. I like the idea of being able to shoot full pressure loads. But sometimes they are not the most accurate loads. Let us know if it starts shipping to the US.
Last edited by Avenger442; 10-19-2014 at 10:28 AM.
We are a lot of pistol and revolver shooters inhere, but I didnīt find a post with some rifle rounds, maybe I missed it.
Well, Iīm feeling very safe and wholy hearted happy with my coated pistol bullets meanwhile.
So I want to try out some reduced loads with my old service rifles, a US Modell of 1917 and a Swiss IG11.
Has anyone inhere did this before and is willing to share his experiences?
We are getting better at this coating thing.....passed the smash and the wipe test....hell, we poured acetone on it and it was still good to go!
Here we Go! Zombie Green Powered version!
Does the Candy Red come in the powdered version?
What are the available powdered versions?
I'll size some this week... The others that were over cooked looked shinny where they were sized
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |