I can dig up an address for Shroader if you need it.
I can dig up an address for Shroader if you need it.
No need, I think their contact info is on their website, besides you have the only guns I know where is that is chambered for them. lol I just think if the cartridge would ever have a chance at makinga go of it, right now would be the best time for cooper or someone to make a comeback with it.
As of today, June 30, 2014, "Ammoguide Interactive" now has the corrected .22CCM dimensions posted to their Cartridge Database. Now there is another source for Dimensions to generate a Chamber Reamer and dies from. Pressures are not listed but the Bullet Weight and Velocity are consistent with .22WMR so its pressure limits would seem to be indicated as a starting limit.
Best Regards,
Chev. William
I have the original load data that came with my rifle from Cooper and there is also more data in the Accurate Arms data book. The AA book also has cartridge dimensions.
I have also developed an extensive amount data with cast boolits in both rifle and revolver.
I also have a finish reamer that was made by Rocky Mountain I believe.
This is such a neat post. I really like the idea of this round. And from that one picture, it does look like a baby 45-70. I'd really like to have one. We'll see what the rest of the year brings me. Thanks, Guys!! mikey
I know I'm late to the party... but is anything going to come of this? I am interested.
You better watch where you go and remember where you beenThat's the way I see it I'm a Simple Man. - Charlie DanielsFor if you forgive other people when they sin against you, your heavenly Father will also forgive you. But if you do not forgive others their sins, your Father will not forgive your sins. -Matthew 6:14-15
What were you expecting? Iirc, (its been a while since I read the thread) Bullshop told of a source for brass, and getting a gun is a matter of talking to a gun smith. That's kinda it right?
There might be some used guns available. My Cooper rifle is #508 so I know they made at least that many. I made one out of a 22 mag Contender barrel that turned our very well. It started out as a Bullberry 22 mag and I just reamed the chamber to the 22 CCM. I have the reamer but will only trust it to someone experienced in chambering because a reamer can be easily damaged from improper use. Re chambering a Contender is the simplest way to get one.
There are a few 22 RF rifles that can be converted to CF and Shroader Bullet Works the folks that sell the 22 CCM brass offer CF bolts for some of those rifles.
I was gonna convert a Savage 93. The model 40 bold head should fit and you would just need to make a extractor.
We need somebody/something to keep the government (cops and bureaucrats too) HONEST (by non government oversight).
Every "freedom" (latitude) given to government is a loophole in the rule of law. Every loophole in the rule of law is another hole in our freedom. When they even obey the law that is. Too often government seems to feel itself above the law.
We forgot to take out the trash in 2012, but 2016 was a charm! YESSS!
You better watch where you go and remember where you beenThat's the way I see it I'm a Simple Man. - Charlie DanielsFor if you forgive other people when they sin against you, your heavenly Father will also forgive you. But if you do not forgive others their sins, your Father will not forgive your sins. -Matthew 6:14-15
I have a set of dies for this little popper, RCBS, in the for sale section.
Yep, forgot about this thread, I did say "little" though.....
Digging up this one.
I like the idea of 22 ccm in a handi, and I have a spare 22lr barrel that I think would work stubbed into a 12 or 20 ga. Good idea, bad idea?
For by grace are you saved through faith, and that not of yourselves, it is the gift of God. Not of works, lest any man should boast. Eph. 2:8,9
Good or Bad depends on the Workmanship and the Loads you intend to shoot.
I would hazard a Guess that the proposed project is doable though.
Best Regards,
Chev. William
Is this the same source?
Bullets Schroeder
1421 Thermal Avenue
San Diego, CA
Phone: (619) 423-3523
I don't know, I couldn't find the website anywhere..
For by grace are you saved through faith, and that not of yourselves, it is the gift of God. Not of works, lest any man should boast. Eph. 2:8,9
Perhaps There is no 'web site' any more?
Chev. William
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |