Powder coated bullets pics only

[Beagle333]

Pink and traffic yellow from Smoke4320, on some Lee 452-252 SWC's

[Coyote3]

Thanks, Beagle. My daughter just saw your last post. Guess which color powder I'll be buying next?

(Hint: It's not yellow.)

Here's some bullets I coated for the wife.

[Beagle333]

Thanks, Beagle. My daughter just saw your last post. Guess which color powder I'll be buying next?
(Hint: It's not yellow.)

The pink is some good lookin' stuff!! 'Covers great too.

[el34]

Real men shoot pink.

[hanleyfan]

here are some boolits with some of the colors I have tried, starting at the left is powderbythepound starlite teal, than all powders ss penny, all powders sun gold, than eastwoods copper vein, than powderbythepound copper vien and last some more all powders sun gold with a bronze base coat to darken the gold. This was all done with the dry tumbling with airsoft 25g BBs.

[el34]

why the rim not coated?

Looks like a taper crimp took PC off.

well that sucks

That was my first whack at PCing a case. I didn't get powder on the top because of how I was keeping powder from getting inside. Ever since then they've all been fine with no chipping or anything from going through all four dies. I shot several and the cases looked same as fresh from the oven.

I've posted several pics-
http://castboolits.gunloads.com/show...3-PC-Gone-Wild
http://castboolits.gunloads.com/show...C-d-some-brass

[armoredman]

My first picture I posted elsewhere, and comments were mostly - "Hey those look like the lipstick samples from the 1980s! I said it isn't the 80s and this looks more like lipstick to me!



175gr Lee in 8mm Mauser/8 x 57JS. Haven't had a chance to try them out yet...

[RP]

http://

AND THE COLLECTION GROWS.

MEMBERS TRY TO STAY ON TRACK WITH THE THEME OF THIS THREAD AVOID REPOSTING THE SAME PICTURES.
I chose to take on the task of this thread so we could have a thread that some could look at and enjoy just seeing others work. This is a team effort and if we all stick to the guide lines I feel it will be quite enjoyable to reveiw and see the progess of the progess in this new way doing things.

[Balta]

MiHec 9 mm 135 grainer in BLUE PC...this is polyester powder paint and its sprayed with tribo powder gun....

[meicalnissyen]

Brilliant

JB welded nuts?

love it, keeps the spacing permanent, taller than washers, fresh surface every time

#4 nuts?

This'll get rid of any flashing problems if somebody is getting more than they want around the bases.




Here is what is under the foil:


After spraying:


Makes the bases come out nice and clean, with a little wrap-around effect.

[meicalnissyen]

PBTP clear, with some black leftover from another session the black goes on forever, i think a teaspoon would make a pound of clear look silvery

[RP]

I can see the nuts on top of the foil getting coated and not working twice. I tried to make some rings to hold my longer heavies that tip over to easy but after one use the ground was lost. Not at contact on the bullet but on the ring hanging on the metal rod.
http://
These are 30 cal more of a test to see if my rack worked not one of my go to bullets in my rifles.

[Beagle333]

Here's my attempt at yellow.



I used the nail method.

[armoredman]

Another set of LAGS first run, set as a political poster.

[1911KY]

I got my Carolina Blue from Smoke in this weekend! One coat DT.


Here it is compared to his standard blue.

[RED333]

[Beagle333]

Did some Smoke's green today. I like that color. It's Zombie Stompin' time with the Whelen!!

[armoredman]

Prior to launch...

[Jupiter7]

Did about 600 45's last weekend. All BBDT one coat.
NOE 230gr(h&g clone) and NOE 45-270SAA

[el34]

ESPC'd some 40s and 45s today, with Tiffany Blue from The Powdercoat Store. It went on very easily and cooked up delicious.

I did a few cases while I was at it. The pic is fuzzy like the powder, and was taken after removing the marbles set on top while spraying.