I think right now I am going to go with the Burris Fast Fire III 3MOA dot with a picatinny rail mount, at this point it seems to be a good fit budget, size, and function value. Now just to wait for the gun to arrive...Hopefully early next week.
I think right now I am going to go with the Burris Fast Fire III 3MOA dot with a picatinny rail mount, at this point it seems to be a good fit budget, size, and function value. Now just to wait for the gun to arrive...Hopefully early next week.
Did a handgun hunt this past season with my buddies Blackhawk 6.5" .41 Mag. He had mounted a Millet Red Dot on top. Nice set up! I got hooked on Red Dots on top of my issued M4 for CQB work back in the mid 90s. I swap between an ACOG or Aimpoint on top of my M4ergy depending on my needs.
CD
De Oppresso Liber
Irag: 91,03,04,05,06,08,09',15', 16',22-23'
Afghanistan: 09,10,11',14',17'-21'
Combat diver... every time I look at acogs I have a small heart attack. How'd you get over that initial price?
After using them for over 10 yrs hard at work I know they are worth it. Did take awhile to save up however.
CD
De Oppresso Liber
Irag: 91,03,04,05,06,08,09',15', 16',22-23'
Afghanistan: 09,10,11',14',17'-21'
”We know they are lying, they know they are lying, they know we know they are lying, we know they know we know they are lying, yet they are still lying.” –Aleksandr Isayevich Solzhenitsyn
My Straight Shooters thread:
http://castboolits.gunloads.com/show...raight-shooter
The Pewter Pictures and Hallmarks thread:
http://castboolits.gunloads.com/show...-and-hallmarks
I have the 6 inch stainless version. Used the S&W K frame scope mount. Had my gunsmith drill and tap the top strap for the mounting screws. Mounted an Ultradot scope. Rested with my handloads gives me a 2 inch group at 25 yards.
You can see where my Gunsmith drill and tapped the holes for the mount;
Last edited by BoolitSchuuter; 04-03-2014 at 04:07 PM. Reason: addad images and detail
Iniustus lex est non lex
Melior morior in vestri pes quam ago in vestri genu
Semper Paratus, Semper Fortis
"I would remind you that extremism in the defense of liberty is no vice! And let me remind you also that moderation in the pursuit of justice is no virtue!" Barry Goldwater
"Never argue with an idiot.They will bring you down to their level and beat you with experience".
ANON
I use a Burris Fast Fire II on my Ruger I D&T the top strap for a thin flat bottom Weaver base so the sight can easily be removed and the iron sights are there, zeroed and ready to go.
Larry Gibson
Attachment 100560
It should both a x frame guns. I don't see any reason it won't.
good news. Googling doesn't give me much on Chen Mounts though. Where does one buy one?
I'd love for someone to make a small weaver base that replaced the rear sight on the FA83. I know weigand used to, but they are no more.
I'll be a nice to you as you'll let me be, or as mean as you make me be.
Polite society started dying the day it was no longer necessary for rude men to physically defend themselves from the consquences of their actions or words.
Nice flush mount there Larry - sure beats my set-up.
Milling the 1911 frame gets the DeltaPoint right down there and backup sights can be used with the Deltapoint attached.
Here's how the 1911 slide was milled, tapped and cnc for the alignment posts - revolvers not so easy.
Last edited by ole 5 hole group; 03-26-2014 at 05:27 PM.
I believe that is actually an Allchin Gun Parts mount:
http://www.allchingunparts.com/detai...=&keywords=S&W
”We know they are lying, they know they are lying, they know we know they are lying, we know they know we know they are lying, yet they are still lying.” –Aleksandr Isayevich Solzhenitsyn
My Straight Shooters thread:
http://castboolits.gunloads.com/show...raight-shooter
The Pewter Pictures and Hallmarks thread:
http://castboolits.gunloads.com/show...-and-hallmarks
”We know they are lying, they know they are lying, they know we know they are lying, we know they know we know they are lying, yet they are still lying.” –Aleksandr Isayevich Solzhenitsyn
My Straight Shooters thread:
http://castboolits.gunloads.com/show...raight-shooter
The Pewter Pictures and Hallmarks thread:
http://castboolits.gunloads.com/show...-and-hallmarks
The Fast Fires also come with the base that fits Weaver bases and is not gun specific. That is what mine is. I used a #46 and flattened the bottom with a file; not difficult at all. You might just be able to have a sight channel milled down the center of that base? May or may not have to shorten the screws.
Larry Gibson
Attachment 100610
"After using them for over 10 yrs hard at work I know they are worth it. Did take awhile to save up however."
Combat Diver is one guy who has been the and done that, a whole lot of times. I give great weight to his endorsement.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |