Hey guys,
Was wondering, what shell holder are you using for 7.63X39 cases? The rims on the cases I have are way too thick for an RCBS #6. Is there one made just for these thick rimmed cases? Inquiring minds want to know!!!
TIA,
Wayne
Hey guys,
Was wondering, what shell holder are you using for 7.63X39 cases? The rims on the cases I have are way too thick for an RCBS #6. Is there one made just for these thick rimmed cases? Inquiring minds want to know!!!
TIA,
Wayne
Aim low boys, there ridin shetlands
I have found the Lee holder does work with the thicker rims.
Can't recall the number though.
I use the RCBS #32 shell holder with Winchester brass with good results. That was the shell holder recommended on the label of my RCBS die box.
Attachment 93573
- Bullwolf
Thanks Guys,
There will be an RCBS #32 in with my next Midway order!
Just for the info, I'm making 6.5 Grendel brass from 7.62X39. So I just break out my PPC shell holder ( a 7.62X39 derivative ) but it would not accept the thicker rims.
Again, thanks for all the responses,
Wayne
Aim low boys, there ridin shetlands
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |