Do any of you have an Uberti 1871 rifle like this:
I've seen comments indicating that it is a faithful reproduction of the #2 Remington rolling block. Besides the stock and brass trigger guard, it looks correct. I'm interested in the internal parts in particular. I have an original #2 that is in typically well worn condition. The breech block and hammer pins are a bit worn and I'm wondering if Uberti pins would work.
Womack's doesn't show them as available on their web site. If anyone has an Uberti, would you mind measuring the exact diameter and length of this pin? Any other thoughts on parts interchangeability - things like the sear and springs? Thanks - Steve