Reloading EverythingLee PrecisionWidenersRotoMetals2
MidSouth Shooters SupplyRepackboxInline FabricationTitan Reloading
Load Data Snyders Jerky
Results 1 to 15 of 15

Thread: Sons Buck with Cast

  1. #1
    Boolit Buddy Dr. A's Avatar
    Join Date
    Apr 2005
    Posts
    258

    Sons Buck with Cast

    Its been a long time since I went through the cast boolit dreams. Years ago I had been shooting large bore cast and have since killed many if not most of my "extra" does at the end of the season with cast. I never worried about expansion. I just cast out of wheel weights. I did use my 32 Special one year and used the water quenched wheel weights with the RCBS boolit. I had one go down in a reasonable time, and the other ran off (250 or so yards) with a good double lung hit. I was not impressed and have avoided the 30 caliber pursuit with cast. I knew I could develop the loads more, as I may not have had much expansion at all. I bought a CZ527 last year, and noticed it loves cast (loves everything). I developed several loads with NOE 314 155. I poured several soft tips last Summer and worried about what speed to shoot them. I actually heated up 6 small pellets to use as the tip and followed after cooling with straight wheel weights that I then water quenched. The load with H322 went along about 2350fps. and I did get good expansion in water jugs at 250 yards. I planned on up to 200 yards, and as it turns out, my son took the shot right at 175 yards. The gun is good for 3 inches at 200 yards, and has been a favorite ever since I got it.



    This is an exit wound

    This below is an entry into the lungs.




    My one example there was shot into water jugs (don't know if that is any good), and lost its tip. Just about exactly what I had in pure lead. I didn't recover the boolit from this morning. The buck went 20 yards and went down hard. I was very impressed with the wound track. I'm sure that it might damage a shoulder, but didn't have any problems with a rib. I also looked carefully for the front remnants of the bullet, but they made it through as well.
    Last edited by Dr. A; 12-04-2013 at 06:15 PM.

  2. #2
    Boolit Bub axman's Avatar
    Join Date
    Apr 2007
    Location
    West Virginia
    Posts
    73
    Great job on deer and bullets

  3. #3
    Vendor Sponsor

    Smoke4320's Avatar
    Join Date
    Apr 2013
    Location
    Right here ..at least I was a minute ago
    Posts
    5,054
    wonderful.. congrads to the son as well
    [SIZE=4][B]Selling Hi Quality Powdercoating Powder

    I carry a Nuke50 because cleaning up the mess is Silly !!

    http://www.bing.com/search?q=nuke50&...7ADE&FORM=QBLH

    I am not crazy my mom had me tested

    Theres a fine line between genius and crazy .. I'm that line
    and depending on the day I might just step over that line !!!

  4. #4
    Boolit Master

    Join Date
    May 2011
    Location
    Athens, AL
    Posts
    2,172
    Very nice, good job for your boy and your boolit.
    "In GOD We Trust"

  5. #5
    Boolit Master
    TheGrimReaper's Avatar
    Join Date
    Jan 2011
    Location
    Fayetteville,TN
    Posts
    909
    Awsome!!! Good deal.

  6. #6
    Boolit Buddy Hogdaddy's Avatar
    Join Date
    Feb 2011
    Location
    Here if I aint gone,, Were there's a gator in the bushes & SHE"S callin my name
    Posts
    383
    Congrats to your son on a outstanding job ; )
    H/D

  7. #7
    Boolit Buddy
    cdet69's Avatar
    Join Date
    Apr 2011
    Location
    Eastover, NC
    Posts
    388
    Nice deer!
    I keep trying to stay afloat but can't help from shooting holes in my own boat.

  8. #8
    Boolit Grand Master
    white eagle's Avatar
    Join Date
    Jul 2010
    Location
    718 miles E. of Wall Drug
    Posts
    6,192
    Thats the way to do it congrats to the three of you
    Hit em'hard
    hit em'often

  9. #9
    Boolit Master
    CastingFool's Avatar
    Join Date
    Mar 2009
    Location
    Climax, Michigan
    Posts
    2,653
    Good shooting! Congrats to your son, that's a good looking buck!

  10. #10
    Boolit Master
    Join Date
    Sep 2012
    Location
    NE Wisconsin
    Posts
    1,441
    Very nice deer and the performance was good enough for the results you were seeking. Very cool.

  11. #11
    Boolit Master Crawdaddy's Avatar
    Join Date
    Oct 2011
    Location
    Tijeras, NM
    Posts
    831
    Congrats to you and your son.

  12. #12
    Boolit Buddy
    Join Date
    Aug 2008
    Location
    NC
    Posts
    176
    nice and good info.

  13. #13
    Boolit Buddy Dr. A's Avatar
    Join Date
    Apr 2005
    Posts
    258
    I did the max for a 150 grain jack which was 28.5gr. With my alloy, the bullet weighed right in a 166gr.

  14. #14
    Boolit Buddy Dr. A's Avatar
    Join Date
    Apr 2005
    Posts
    258
    I've worried about it as being an overload, but that action is solid, and it shoots very accurately. I do have a Saiga that I'm going to try working up a load like this someday, but the accuracy, although not poor, is not stellar like this gun. With a gun this size (CZ 527), its frankly surprising to have an effect like this on deer. I've had many run farther with 308 with J-word bullets.

  15. #15
    Boolit Buddy Dr. A's Avatar
    Join Date
    Apr 2005
    Posts
    258
    Quote Originally Posted by excess650 View Post
    I shoot the Lee C309-150F S&L in a .313" die. They drop from the mould at .312" and weigh 160gr with GC. I've shot up to 27gr H322, but got best accuracy in the 23-25gr range, so settled at 24gr in Lapua cases.

    Judging from the terminal results at 175 yards, your load appears to be rather effective!
    What gun do you shoot this out of?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check