I mix 130mls at a time. I coat approximately 250 to 300 9mm 125gr bullets at a time. I'd use 7mls per coat. with 45's I coat 200 to 250 at a time with the same amount (7mls) per coat. Everything comes out fine.
Always smash and wipe after the first coat. This will show shattering if the first coat is not right, when smashed.
Today I ran the experimental resins 1 and 2 with 125gr RN in my SVI race gun at Major power factor (1400fps)
All fired from a bench rest at 50 metres. ALl shot great. Accurate and clean. I'll post some photos later of the targets and the bore.
Grem. Will do.