Would anyone have the drill bit/die diameters for a .308 gas check maker? I built a check maker but my measurements didn't make par, (DOH!) so I ended up with something that might work in .32 caliber, but is too big for my 7.62 and .308 caliber.
Would anyone have the drill bit/die diameters for a .308 gas check maker? I built a check maker but my measurements didn't make par, (DOH!) so I ended up with something that might work in .32 caliber, but is too big for my 7.62 and .308 caliber.
It you measure what you did then just subtract the amount you are over you would get the correct size for your method.
Another option could be to try them as is and see if they work as they will size somewhat to fit but if you can not keep them centered accuracy will suffer.
When I think back on all the **** I learned in high school it's a wonder I can think at all ! And then my lack of education hasn't hurt me none I can read the writing on the wall.
I also would be very interested. Thanks
1Shirt!
"Common Sense Is An Uncommon Virtue" Ben Franklin
"Ve got too soon old and too late smart" Pa.Dutch Saying
Oh sure now I just HAVE to make me one of these! Do I need to? NO! Do I have time to? NO! Do I have things I should be doing instead of this? DEFINATELY! Will I probably end up doing this anyways? YES!
Thanks for sharing your great idea!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |