i want to shoot 9 mm 44mag and 30 cal rifles with gas check boolits(i already have molds and check makers) My search is for long term storage and performance. I seek j-word consistency and long term storage. My question is can and will the two work together up to 2000 fps and most likely 1300 to 1850 fps WITH air cooled clip on wheel weights sweetened with 2% linotype sized .002 over bore size? in handguns AND rifles. My plan was to coat install checks and size. I do not want to TOOL up on this project as money is tight if it will not work. we shoot 105, 120 and 140 grain 380, 9mm and 357/38 sized@ .359 44mag pistol and rifle 310 and 265 grain sized@.4315 and various 30 cal rifles 155, 170, 185, 200 and 250 grain sized @.311 and .314 and was considering using it on full bore conicals in 50, 54 and 58 frontstuffers eliminating bore butter........ Ideas?/ Thoughts? Or am I barking up the wrong tree here
gutpile