Tried the piglet method yesterday. About 100 40 sw and 130 .30 cal. Tried laquer thinner for the 40 and acetone for the .30 cal. Acetone worked better for me. It was over 90 degrees on my porch. Solvent evaporated pretty quickly. Hfpc flat black. Used old toster oven. Had a free standing oven thermometer to check my temps. Shot about 20 of the 40s in my stock glock 23 no fouling observed. Didnt bench for accuracy. Ok... i hit the 2 liter bottle from 20 yds ..will paper test them when its not a furnace on my range. Surface was pretty rough on both batches. I made some trays using some alum expanded metal gutter leaf guards i had left over. Cut to fit the toster oven and Bent up edges with linemans pliers. Seemed to work well. The 40s i sized and loaded them. The 30s i gas checked and sized and lubed with lbt blue. I will test and see if any velocity differences in lubed vs un lubed in the 30 cal rifle loads