I started reading another thread about various methods and coating materials and chose the Harbor Freight Powder Coat and acetone Method.
I have compared this method of coating against the Hi Tech coating & Copper Plated.
My test results are nowhere near finished but in this lovely dry climate the Hi Tech dries up and flakes off when tested with a hammer. To be fair these bullets have been in my possession for exactly 2 months.
My HFPC bullets smashed with a hammer showed far less surface distortion and zero flaking. I will test them again when my HFPC boolits turn 2 months old.
PLEASE KEEP THIS ABOUT THE PIGLET METHOD