First off forgive me as I'm new to the whole picture posting stuff.
I set about trying to get decent cast loads for my xp100 pistol. With the help of Jim and referencing data from his graphalox shooting, I settled on Red Dot powder. All shooting was done at 50yds and shot over my chrony set 8ft in front of bench.
This pic is during my initial testing a week or so ago, the 8gr load showed definate promise although I did shoot 1 into the wrong target.
I went back to the range today with more test loads, and also a test of water dropped or air cooled. These are my results.
These are NOE nato 60gr, gas checked, 3part BAC 1part Cred, and alloy is 75%coww 25% soft lead with a touch of tin.
My next goal is to see how it holds at longer range, and see if if knocks down steel.
Thanks again Jim and others who have helped in this quest.